Cutimed Siltec

<ul><li>Do not use the device if the packaging is damaged or open prior to use and dispose of the device according to local regulations.</li><li>Before applying the dressing cleanse the wound area with an appropriate wound cleanser and dry the surrounding skin.</li><li>Dressing Preparation and Application:</li><li>Choose a dressing size and shape to ensure that the central absorbent pad (area within the adhesive window), is 1cm larger than the wound area.</li><li>Remove the dressing from the sterile pack, avoid touching the wound contact surface and the adhesive surface where applicable. Remove the release liner if using the adhesive dressing.</li><li>The dressing can be cut to shape for convenience.</li><li>Hold the dressing over the wound and line up the centre of the dressing with the centre of the wound. Place the pad directly over the wound. For the adhesive dressing, smooth down the adhesive border.</li><li>Ensure the dressing is not stretched upon application. Smooth down the adhesive border for adhesive dressing. Ensure joints are sufficiently flexed to allow patient mobility.</li><li>An appropriate retention bandage or tape should be used to secure the dressing in place if the dressing does not have an adhesive border, or if the adhesive dressing has been cut.</li><li>For difficult to dress anatomical locations, such as the heel or the sacrum, the specially shaped adhesive dressings may be used.</li><li>Discard any unused portion of the product after dressing the wound.</li><li>Dressing Removal:</li><li>The dressing should be changed when clinically indicated (e.g. leakage, bleeding, increased pain). Maximum recommended wear time is up to seven days.</li><li>The wound should be cleansed at appropriate intervals.</li><li>To remove the dressing, press down gently on the skin and carefully lift one corner of the dressing. Continue until all edges are free. Carefully lift away the dressing and discard according to local clinical protocols.</li></ul>

AQUACEL® Ag Foam Non-adhesive

Do not use the device if the packaging is damaged or open prior to use and dispose of the device according to local regulations.

<div>AQUACEL® Foam dressings may be used, with the consultation of a healthcare professional, for the management of exuding and non-exuding wounds, and for the protection of intact skin. AQUACEL® Foam dressings may be included in a comprehensive protocol of care to protect intact skin from breakdown. AQUACEL® Foam dressings may be used as a primary or secondary dressing.</div><div><br></div><div><br></div><div>AQUACEL® Foam dressing is indicated for the treatment of:</div><div><br></div><ul><li>Diabetic foot ulcers</li><li>Pressure ulcers</li><li>Leg ulcers</li><li>Surgical wounds</li><li>Partial thickness burns</li><li>Traumatic wounds</li></ul>

AQUACEL® Foam Dressing Adhesive

AQUACEL® Foam dressings may be used, with the consultation of a healthcare professional, for the management of exuding and non-exuding wounds, and for the protection of intact skin.&nbsp;

AQUACEL® Foam Dressing Non-Adhesive

<p>Biatain Silicone with 3DFit Technology conforms to the wound bed and reduces exudate pooling to promote optimal healing conditions. It can be used on a broad range of exuding wounds, making Biatain Silicone the obvious choice for moist wound healing.&nbsp;</p><p>bBiatain Silicone with 3DFit Technology</p><p><br></p><p>Conforms to the wound bed</p><p>True conformability ensures close contact to the wound bed.</p><p><br></p><p>Absorbs vertically</p><p>77% higher fluid handling capacity for longer weartime1.</p><p><br></p><p>Retains exudate</p><p>and 99.98% of bacteria2</p>

Biatain Silicone with 3DFit Technology conforms to the wound bed and reduces exudate pooling to promote optimal healing conditions. It can be used on a broad range of exuding wounds, making Biatain Silicone the obvious choice for moist wound healing.&nbsp;bBiatain Silicone with 3DFit TechnologyConforms to the wound bedTrue conformability ensures close contact to the wound bed.Absorbs vertically77% higher fluid handling capacity for longer weartime1.Retains exudateand 99.98% of bacteria2

Biatain Silicone

Biatain Silicone with 3DFit Technology conforms to the wound bed and reduces exudate pooling to promote optimal healing conditions.

<p>Biatain Silicone with 3DFit Technology conforms to the wound bed and reduces exudate pooling to promote optimal healing conditions. It can be used on a broad range of exuding wounds, making Biatain Silicone the obvious choice for moist wound healing.&nbsp;</p><p>bBiatain Silicone with 3DFit Technology</p><p><b>Conforms to the wound bed</b></p><p>True conformability ensures close contact to the wound bed.</p><p><b>Absorbs vertically</b></p><p>77% higher fluid handling capacity for longer weartime1.</p><p><b>Retains exudate</b></p><p>and 99.98% of bacteria2</p>

<div>Biatain Silicone with 3DFit Technology conforms to the wound bed and reduces exudate pooling to promote optimal healing conditions. It can be used on a broad range of exuding wounds, making Biatain Silicone the obvious choice for moist wound healing.&nbsp;</div><div><br></div><div>bBiatain Silicone with 3DFit Technology</div><div><br></div><div><b>Conforms to the wound bed</b></div><div><br></div><div>True conformability ensures close contact to the wound bed.</div><div><br></div><div><b>Absorbs vertically</b></div><div><br></div><div>77% higher fluid handling capacity for longer weartime1.</div><div><br></div><div><b>Retains exudate</b></div><div><br></div><div>and 99.98% of bacteria2</div>

<p>Biatain® Silicone Ag is a soft, flexible and absorbent antibacterial foam dressing with a gentle silicone adhesive. Biatain® Silicone Ag contains silver, which is continuously released into the wound. Can be used on infected wounds or wounds at risk of infection.</p><p>Superior absorption due to unique 3D foam</p><p>When in contact with exudate the 3D foam structure of Biatain® Silicone Ag conforms closely to the wound bed for superior absorption - even under compression (2,3). The unique 3D foam structure absorbs the exudate vertically and locks the fluid away within its structure, still leaving the wound moist for optimal wound healing conditions. The close contact to the wound bed reduces dead space and minimises exudate pooling which can lead to infection (4).</p><p><br></p><p>Sustained silver release</p><p>Silver complex with documented effect on bacteria commonly found in infected non-healing wounds, including MRSA, VR-E, ESBL-producing bacteria and Pseudomonas (2,3). The silver profile provides a sustained release of silver during the entire wear time (up to 7 days) (1).</p><p><br></p><p>Gentle and secure fit</p><p>The silicone adhesive layer provides a secure fit to keep the dressing in place while ensuring minimal pain upon removal. The soft and flexible design of Biatain® Silicone Ag ensures a close fit to wound and body, and the foam pad at skin level makes Biatain® Silicone Ag suitable to wear under compression.</p><p><br></p><p>Intuitive to use</p><p>Biatain® Silicone Ag has 3-piece non-touch opening for an easy and aseptic application.</p>

Biatain Silicone AG

Biatain® Silicone Ag is a soft, flexible and absorbent antibacterial foam dressing with a gentle silicone adhesive. Biatain® Silicone Ag contains silver, which is continuously released into the wound. Can be used on infected wounds or wounds at risk of infection.

<div>Unique 3D foam structure for superior absorption</div><div>When in contact with exudate the unique 3D foam structure of Biatain® conforms closely to the wound bed for superior absorption – even under compression (1-3).</div><div><br></div><div>Minimised risk of maceration and leakage (1)</div><div>The superior absorption and retention of exudate minimises risk of maceration and leakage. This non-adhesive dressing is well suited for use on wounds with very fragile periwound skin.</div><div><br></div><div>Long wear time</div><div>Due to the superior absorption capacity of Biatain® the dressing has a long wear time. Studies have shown that Biatain® is a cost-effective solution with a wear time up to 7 days (1-3,7).</div><div><br></div><div>Soft and flexible dressing</div><div>Biatain® Non-Adhesive is a soft and flexible dressing that is comfortable to wear. The bevelled edges reduces risk of pressure marks (4,6).</div><div><br></div><div>Mode of action</div><div>The unique 3D foam structure absorbs the exudate vertically and locks the fluid away within its structure, still leaving the wound moist for good moist wound healing conditions.</div><div><br></div><div>Composition</div><div>Biatain® Non-Adhesive is a soft and conformable polyurethane foam dressing with a semi-permeable, bacteria- and waterproof top film.</div><div><br></div><div>Usage</div><div>Biatain® Non-Adhesive can be used for a wide range of exuding wounds, including leg ulcers, pressure ulcers, non-infected diabetic foot ulcers, second-degree burns, donor sites, postoperative wounds and skin abrasions. Biatain® Non-Adhesive can be used in combination with compression therapy.</div><div><br></div>

Biatain Non-Adhesive

Biatain® Non-Adhesive is a soft and conformable polyurethane foam dressing that effectively absorbs and retains wound exudate (1,2). This ensures a moist environment for healing of exuding wounds (7,8).

<div>Cutimed® Siltec® B</div><div>is a silicone coated, sterile, absorbent polyurethane foam dressing with superabsorbent stripes to additionally absorb and lock wound exudate. The wound contact surface allows adherence to the periwound skin but not to the moist wound bed or newly formed epithelial tissue. The additional silicone adhesive border allows secure and gentle fixation.&nbsp;</div><div><br></div><div>Self-adhesive silicone border</div><div>Reliable exudate management</div><div>Anatomical fit&nbsp;</div>

Cutimed Siltec B

<div>Cutimed® Siltec® B</div><div>is a silicone coated, sterile, absorbent polyurethane foam dressing with superabsorbent stripes to additionally absorb and lock wound exudate.&nbsp;</div>

<div>Key Benefits</div><ul><li>Save up to 63% compared to other leading brands3</li><li>Effective under compression</li><li>Excellent absorption and retention properties</li><li>Conformable and comfortable</li><li>Locks and retains exudate, MMPs and bacteria in the inner core1,2</li><li>Reduces levels of MMP-2 and MMP-9 in vitro2</li><li>Hypoallergenic – no glues or adhesives used</li><li>Large range of sizes</li></ul>

Kliniderm Superabsorbent

Super absorbency, super performance 

Kliniderm® superabsorbent is a four-layer, protease modulator superabsorbent dressing held together by a hypoallergenic seal.

Mölnlycke Health Care is a world-leading MedTech company that specialises in innovative solutions for wound care and surgical procedures. Mölnlycke products and solutions are used daily by hospitals, health care providers and patients in over 100 countries around the world. Attention: The information provided in this site/page is intended solely for indicative purpose. While we have taken any precautions to ensure that the content of this site/page is both current and accurate, errors can occur. In all cases you should consult with the IFU accompanying the product before using the product. 

The Mölnlycke, Alldress, Avance, BARRIER, Biogel, Biogel Eclipse, Biogel Orthropro, Biogel PI Pro-Fit, Biogel Sensor, Deep Defense, Easywarm, Elset, Epaderm, Exufiber, Granulox, Granudacyn, Hydrolock, EZ Derm, Hacdil-S, Hibi, Hibicet, Hibiclens, Hibidil, Hibiscrub, Indicator, Mefix, Melgisorb, Mextra, Mepiform, Mepilex, Mepiseal, Mepitac, Mepitel, Mepore, Mesalt, Mesoft, Mesorb, Mestopore, Neoderm, Normlgel, PI Indicator, PI UltraTouch, ProcedurePak, Reveal, Safetac, Setopress, Skinsense, Tubifast, Tubifast 2-way stretch and Tubigrip trademarks, names and logos are registered globally to one or more of the Mölnlycke Health Care group of companies.

Mepilex Border Lite

Mölnlycke Health Care is a world-leading MedTech company that specialises in innovative solutions for wound care and surgical procedures. Mölnlycke products and solutions are used daily by hospitals, health care providers and patients in over 100 countries around the world.

<p>Non–Adhesive Foam Dressings are designed to maintain a moist environment for optimal healing of moderately exuding wounds and those that require compression.</p><p>

Sterile
</p><p>Latex free</p><p>
Single use</p><p>
Size: 7.5 x 7.5 cm</p>

Non–Adhesive Foam Dressings are designed to maintain a moist environment for optimal healing of moderately exuding wounds and those that require compression.

Sterile
Latex free
Single use
Size: 7.5 x 7.5 cm

365 Non–Adhesive Foam Dressings

Non–Adhesive Foam Dressings are designed to maintain a moist environment for optimal healing of moderately exuding wounds and those that require compression.

<p>Sterile Self–Adhesive Silicone Foam Wound Dressings manage moderately exuding wounds whilst minimising pain and skin/wound trauma during dressing changes.
</p><p>
Sterile
</p><p>Latex free</p><p>
Single use</p><p>
Size: 7.5 x 7.5 cm</p>

Sterile Self–Adhesive Silicone Foam Wound Dressings manage moderately exuding wounds whilst minimising pain and skin/wound trauma during dressing changes.

Sterile
Latex free
Single use
Size: 7.5 x 7.5 cm

365 Sterile Self–Adhesive Silicone Foam Wound Dressings

Sterile Self–Adhesive Silicone Foam Wound Dressings manage moderately exuding wounds whilst minimising pain and skin/wound trauma during dressing changes.

Foam Dressings

Filters

Cutimed Siltec

AQUACEL® Ag Foam Non-adhesive

AQUACEL® Foam Dressing Adhesive

AQUACEL® Foam Dressing Non-Adhesive

Biatain Silicone

Biatain Silicone AG

Biatain Non-Adhesive

Cutimed Siltec B

Kliniderm Superabsorbent

Mepilex Border Lite

365 Non–Adhesive Foam Dressings

365 Sterile Self–Adhesive Silicone Foam Wound Dressings

Useful links

Policies

Contact Us

Foam Dressings

Filters

Price

Cutimed Siltec

AQUACEL® Ag Foam Non-adhesive

AQUACEL® Foam Dressing Adhesive

AQUACEL® Foam Dressing Non-Adhesive

Biatain Silicone

Biatain Silicone AG

Biatain Non-Adhesive

Cutimed Siltec B

Kliniderm Superabsorbent

Mepilex Border Lite

365 Non–Adhesive Foam Dressings

365 Sterile Self–Adhesive Silicone Foam Wound Dressings

Useful links

Policies

Contact Us